R4N10-XX pads a N line down by 1-60 dB: a fixed 50 ohm attenuator, DC to 4 GHz, rated 10 W.
A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.
FAQ – Which end takes the power? For bidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.
FAQ – What happens above 4 GHz? The attenuation accuracy and VSWR are specified to 4 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.
The pad is bidirectional, so attenuation is the same whichever way the signal runs; that suits lines where power can arrive from either direction.
At 10 W of dissipation the body is sized to take continuous input at that level; the resistive element and its heat path are matched to it, which is why the rating is a hard number rather than a guideline.
Specified from DC to 4 GHz, the pad keeps its accuracy across the whole band rather than only at spot frequencies.
Key numbers: attenuation 1-60 dB; 10 W power; VSWR 1.2:1 max; 50 ohm impedance; tri-metal plated brass body.
Field engineers carry them for the opposite reason: when the reading is over range, the pad brings the signal back inside the instrument’s window.
FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.







Reviews
There are no reviews yet.