,

4.3-10 Coaxial Fixed Attenuator | Professional, DC-3GHz, 2 W, 1-30 dB, Bidirectional, Male-Female, Round, Tri-metal Plated Brass Connector

$124.00

+ Free Shipping
SKU: R3P2-XX Categories: ,

A fixed 4.3-10 attenuator, R3P2-XX holds 1-30 dB across DC to 3 GHz at 2 W of input power.

A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.

The DC to 3 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.

Key numbers: attenuation 1-30 dB; 2 W power; VSWR 1.2:1 max; 50 ohm impedance; tri-metal plated brass body.

Field engineers carry them for the opposite reason: when the reading is over range, the pad brings the signal back inside the instrument’s window.

FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.

FAQ – Which end takes the power? For bidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.

The pad is bidirectional, so attenuation is the same whichever way the signal runs; that suits lines where power can arrive from either direction.

At 2 W of dissipation the body is sized to take continuous input at that level; the resistive element and its heat path are matched to it, which is why the rating is a hard number rather than a guideline.

FAQ – What happens above 3 GHz? The attenuation accuracy and VSWR are specified to 3 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.

R3P2-XX datasheet preview – click to view full PDF

Weight 0.05 kg
Dimensions 8 × 5 × 4 cm
Connector Type

Max Frequency

Reviews

There are no reviews yet.

Be the first to review “4.3-10 Coaxial Fixed Attenuator | Professional, DC-3GHz, 2 W, 1-30 dB, Bidirectional, Male-Female, Round, Tri-metal Plated Brass Connector”

Your email address will not be published. Required fields are marked *