,

N Female 50Ω to N Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel

$293.00

+ Free Shipping
SKU: RAMP03N06 Categories: ,

RAMP03N06 bridges an N Female 50Ω and an N Female 75Ω with a built-in resistive matching network, so a 50 ohm instrument can feed a 75 ohm system across DC to 3 GHz.

Inside the body is a resistive matching pad, so the impedance step becomes a fixed, repeatable insertion loss instead of a reflection that changes with cable length.

FAQ – How much loss does the pad add? The theoretical minimum for a 50/75 ohm matching pad is about 5.7 dB; the exact figure for each part is stated in its specification.

Connect N Female 50Ω on the instrument side and N Female 75Ω on the network side; each side is labelled by its connector and impedance in the part number.

Key numbers: 50 ohm to 75 ohm matching pad; DC to 3 GHz; VSWR 1.25:1 max; passivated stainless steel body.

Typical homes for it are CATV head-ends, broadcast racks and video labs, all places where 75 ohm plant has to coexist with 50 ohm test equipment.

FAQ – Why not just use a plain barrel? A barrel leaves the impedance step in place, so part of the power reflects and readings depend on the surrounding electrical length. The matching pad trades that reflection for a fixed, repeatable loss.

FAQ – Does direction matter? Order by the 50 ohm connector you have and the 75 ohm connector you need. The pad is electrically symmetrical, but the two interface families are not interchangeable.

RAMP03N06 datasheet preview – click to view full PDF

Weight 0.03 kg
Dimensions 6 × 3 × 3 cm
Connector Type

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “N Female 50Ω to N Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel”

Your email address will not be published. Required fields are marked *