A straight 50 Ω adapter, RANM18S03 converts a [Premium Pick] SMA male interface to an SMA Non-Magnetic female interface across the full DC–18 GHz band.
One end is a male [Premium Pick] SMA interface, the other a female SMA Non-Magnetic interface — the two sexes differ, so match each end against the cable or port it has to meet.
The straight body keeps the run axial, which is the shortest electrical path and the lowest-loss layout when the chassis has room. It is the usual answer for a panel cut-out or test jig that was designed around one interface and now has to accept the other.
DC–18 GHz covers the great majority of SMA lab work, from baseband through Ku-band. The metal body keeps the interface dimensionally stable through repeated mating cycles.
Key numbers: VSWR 1.2:1 max; 50 Ω impedance; metal body.
The [Premium Pick] SMA end and the SMA Non-Magnetic end both follow their usual interface standards; no proprietary tooling is needed.
FAQ — What is the worst-case loss? See the datasheet dB maximum insertion loss at the top of the band, per the datasheet below.

![RANM18S03 [Premium Pick] SMA Male to SMA Female Non-Magnetic Adapter | Precision, Low Magnetic, DC-18GHz, Beryllium Bronze with Non-Magnetic Gold Plating](https://rfspect.com/wp-content/uploads/2026/09/RANM18S03.png)
![[Premium Pick] SMA Male to SMA Female Non-Magnetic Adapter | Precision, Low Magnetic, DC-18GHz, Beryllium Bronze with Non-Magnetic Gold Plating RANM18S03 datasheet preview – click to view full PDF](https://rfspect.com/wp-content/uploads/2026/10/RANM18S03_EN_p1.jpg)




Reviews
There are no reviews yet.