, ,

2.4mm Female to SMP(GPO) Female Millimeter-Wave Adapter | Ultra, DC-40GHz, Stainless Steel & Gold-Plated Beryllium Copper

$195.00

+ Free Shipping
SKU: RA4019H Categories: , ,

Crossing a 2.4mm Female port and an SMP(GPO) Female port without an adapter means re-terminating one side. RA4019H avoids that, and it is specified to 40 GHz.

Key specifications

  • Frequency: DC to 40 GHz
  • Impedance: 50 Ω
  • VSWR: 1.25:1 max
  • Insertion loss: 0.40 dB max
  • Interfaces: 2.4mm Female / SMP(GPO) Female
  • Body and contact: Stainless Steel & Gold-Plated Beryllium Copper
  • Grade: Ultra

In practice

In a millimetre-wave setup it appears at the device plane, where changing the connector family on the DUT is not an option. Keep it clean and torque it to the series figure; repeatability degrades long before the VSWR number does. Because that side is a blind-mate interface, it has no thread to hold it: the pair is pushed on straight and held by the detent, so the body has to be aligned with the module before it is pressed home, and the mating cycle count is finite. Two jacks, so the adapter supplies the plug interface at both ends. That is the shape you need when two plug-terminated cables have to be joined without a bulkhead, or when a male-ended cable has to meet a male port.

What it mates with

2.4mm mates only with 1.85mm and other 2.4mm parts. It deliberately does not mate with SMA, which is what stops a 50 GHz port being damaged by a mis-threaded connector. SMP(GPO) is a blind-mate board-to-board interface: the two halves snap together without a thread, and a SMP part will mate with nothing else. That is why it appears on modules that have to be dropped into a fixture rather than screwed down. Two parts worth comparing are 2.4mm Female to 2.4mm Female 4-Hole Flange Millimeter-Wave Adapter (RA5001FH) and 2.4mm Female to 2.4mm Female Millimeter-Wave Adapter (RA5001H) — same interface family, different grade or body style, so the choice usually comes down to the frequency headroom you need rather than to the price.

A common question

Can this adapter be used below its rated frequency?
Yes, and it will generally measure better there. Running a millimetre-wave adapter at a lower band is harmless; the reverse — running a low-band part near its cutoff — is where the match and the repeatability fall apart.

RA4019H datasheet preview – click to view full PDF

Weight 0.03 kg
Dimensions 6 × 3 × 3 cm
Connector Type

,

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “2.4mm Female to SMP(GPO) Female Millimeter-Wave Adapter | Ultra, DC-40GHz, Stainless Steel & Gold-Plated Beryllium Copper”

Your email address will not be published. Required fields are marked *