,

2.4mm Female to 2.4mm Female Millimeter-Wave Adapter | Ultra, DC-50GHz, Stainless Steel

$249.00

+ Free Shipping
SKU: RA5001H Categories: ,

RA5001H is the Ultra-grade adapter for the 2.4mm female to 2.4mm female transition: straight body, 50 GHz rating, 50 ohm. The headline figures are a VSWR of 1.15:1 maximum and an insertion loss of 0.20 dB, all specified across the full DC to 50 GHz band rather than at spot frequencies. With a socket at each end, this part mates two male connectors, which is what a cable-to-cable run needs. Because the transition happens inside one body, the impedance step is controlled and the part behaves the same way whichever end is connected first. The straight body keeps the run axial, which is the lowest-loss, lowest-stress way to join two ports. It is built in the Ultra tier, the tightest tolerance class of this interface family, intended for daily precision work.

Specifications

  • Interface A: 2.4mm female
  • Interface B: 2.4mm female
  • Frequency: DC to 50 GHz
  • Impedance: 50 ohm
  • VSWR: 1.15:1 maximum
  • Insertion loss: 0.20 dB maximum
  • Body: stainless steel
  • Weight: 0.03 kg
  • Grade: Ultra

Where it is used

Field kits carry it because one adapter covers the mismatch between whatever the site has and whatever the instrument expects. Antenna ranges and shield rooms use it to move between the precision interface at the instrument and the rugged one at the chamber wall.

The adapter is also the sacrificial part in a wear path: replace it when the match drifts instead of replacing the instrument port.

Q-band operation rewards the precision tiers: the same interface in a standard build would show a visibly worse return loss here.

Compatibility and mating

Mating is limited to 2.4mm and 1.85mm parts. The small centre pin and air dielectric reward careful handling: gauge or inspect the interface if a measurement suddenly looks worse than it should.

Do not use the body as a lever. Side load on a connected cable is what bends centre pins and opens the match.

Ordering

The SKU is the order code. If you need a different interface pair, a different gender combination or a longer body, ask before ordering rather than adapting this part on site.

Frequently asked questions

Why does the price differ from a standard adapter?
Precision tiers hold tighter tolerances and use better materials and plating, which costs more to machine and to test. The tier is part of the part number, not an option.

How many mating cycles will it take?
Precision interfaces are usually rated in the hundreds to a thousand cycles, and the exact figure is in the datasheet. Wear shows first as a rise in return loss.

Can I use it the other way round?
Mechanically the adapter is symmetric only if both ends are the same sex. With a male/female pair the direction is fixed by the genders, so match the male end to the female port.

Does it work at DC?
Yes, it is a passive coaxial through-connection, so it passes DC as well as RF unless the datasheet says otherwise.

Will it degrade my VSWR?
Every interface adds a reflection. The guaranteed maximum is in the specifications above, and a good adapter typically measures better than its limit on a calibrated analyser.

RA5001H datasheet preview – click to view full PDF

Weight 0.03 kg
Dimensions 6 × 3 × 3 cm
Connector Type

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “2.4mm Female to 2.4mm Female Millimeter-Wave Adapter | Ultra, DC-50GHz, Stainless Steel”

Your email address will not be published. Required fields are marked *