The 1.85mm Male to 1.85mm Female High-Performance Armored assembly RCP500-VMVF-L is built on the RCT260 cable and covers DC to 67 GHz; order it cut to length.
One end is male and the other female, so match each end against the port or cable it has to meet.
FAQ – What bend radius should I respect? The datasheet gives the minimum bend radius of the cable. Tighter bends raise the loss and, over time, shift the match; route with a generous margin.
The armour layer protects the core from crush, tension and abrasion, which is what keeps the electrical performance stable once the assembly has been routed, clamped and walked past a few hundred times. The cable is the high-performance type of the series: tighter tolerances on the electricals and better consistency from unit to unit.
Loss is the number to budget: 6.32 dB per metre at 67 GHz maximum, multiplied by the length you order, plus the connectors.
Match is specified at VSWR 1.3:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 67 GHz; 6.32 dB/m max at 67 GHz; VSWR 1.3:1 max; 50 ohm impedance.
The L suffix in the part number stands for cut-to-length: you specify the finished length, and every assembly is checked before despatch.
System builders use it for the permanent RF runs inside a rack, where the cable is routed once and has to keep performing for years.
FAQ – How is it tested before shipping? Each assembly is continuity-checked and insertion-loss tested, and the results are tied to the part number and length marked on the jacket.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.







Reviews
There are no reviews yet.