Cable assembly

Every cable assembly in the catalog lives under this page: 311 assemblies, 50 ohm, spanning DC to 110 GHz depending on series, terminated with SMA, N, 2.92mm, 2.4mm, 1.85mm, 3.5mm, SMP and other precision interfaces in straight, right-angle and bulkhead styles. Each assembly is built to order length on a specified cable family and tested before it ships.

The cable decides the assembly’s character, so the catalog is organised by cable series rather than by connector. The quick guide below maps the series to the job; the series pages carry the full connector and length matrices.

Quick selection guide — cable assembly families:
RCA ultra-low-loss phase-stable | to 67 GHz | VNA and precision measurement | RCA series
RCB high-power phase-stabilizing | high CW power | transmitter and amplifier links | RCB series
RCD high-strength stable-phase | ruggedised | field and production test | RCD series
RCE economy ultra-flexible | to 26.5 GHz | bench and rack wiring | RCE series
RCM economy low-loss | to 18 GHz | cost-sensitive general purpose | RCM series
RCP armored | to 40 GHz | crush- and torque-resistant protection | RCP series
RCQ flexible interconnect | to 40 GHz | module and board interconnect | RCQ series
RCR semi-flexible | hand-formable | fixed routing without bending tools | RCR series
RCT high-performance test | to 40 GHz | daily VNA port duty | RCT series
RCV VNA-dedicated | to 67 GHz | NMD test-port cables for network analysers | RCV series

Three decisions order the choice. Frequency first: the series ceiling must sit above your band with margin — an RCA to 67 GHz, an RCE to 26.5 GHz. Flex life second: a cable that bends daily on a VNA port wants a phase-stable test series; a cable routed once behind a rack wants economy. Environment third: armored RCP for floors and factories, semi-flexible RCR where the routing is fixed but tools are not.

Frequently asked questions

What does phase-stable mean? That the electrical length shifts very little as the cable is flexed or the temperature changes — the property that keeps a VNA calibration valid while the cable moves.

How do I order a custom length? Each series page lists standard lengths; assemblies are built to order, so a non-standard length or connector combination is a configuration, not a special project.

Straight or right-angle connectors? Right-angle relieves strain where the cable exits a tight panel; straight bodies perform marginally better at band edge. Pick for the mechanical situation first.

What is an NMD connector on a test cable? The ruggedised test-port interface that mates a network analyser’s port; it takes the daily mating wear so the instrument does not. See NMD adapters for the standalone parts.

Do assemblies come with test data? Yes — assemblies are tested before shipment, and the series datasheet gives insertion loss and VSWR per metre per band.

How long does a test cable last? Flex life, not frequency, kills test cables. Phase-stable series are rated for tens of thousands of flexures; retiring a cable when its repeatability drifts is normal lab practice.

Related: the RF adapter catalog for between-series transitions at the cable ends, attenuators and coaxial loads to complete the chain, or RCR semi-flexible assemblies where the run has to hold its shape, and our precision connector selection guide.
Choosing between the families above is covered in cable assembly selection: loss, phase stability and the connector-cable junction, which compares all five on the same chart.

Showing 1–40 of 311 results