RCQ Flexible Interconnect Cable Assembly

Assemblies in this series are built on RCQ260 cable — RCQ flexible interconnect cable — and terminated on SMA, SSMP, SMPM, SMP, BNC. They are cut to the length you specify and run DC to 18 GHz.

Choose this series for inside chassis and between adjacent modules. The connector options span SMA, SSMP, SMPM, SMP, BNC, in straight and right-angle bodies where the interface allows, so the same cable can leave an instrument on one end and reach a fixture on the other.

• Frequency: DC to 18 GHz
• Impedance: 50 Ω nominal
• Cable: RCQ260
• Connector options: SMA, SSMP, SMPM, SMP, BNC
• Length: made to order, and marked on the assembly

Typical applications are inside chassis and between adjacent modules. If the run is long, check the loss budget at the top of the band before fixing the length; if it is short, check the bend radius instead.

Frequently asked questions

Can a damaged assembly be repaired?
Connectorised assemblies can usually be re-terminated once, provided the cable end has enough length left. Semi-rigid and armor-jacketed types are less forgiving, so it is often quicker to replace the assembly than to rebuild it.

What length can I order?
Assemblies are cut to order. Give the length and the connector pair and the part is built and tested to that length. Very short assemblies are limited by the bend radius of the cable, very long ones by loss.

Are the assemblies tested before shipping?
Yes. Each assembly is terminated, continuity-checked and insertion-loss tested, then marked with its part number and length so it can be traced back to the build.

See also RCA ultra-low loss phase-stable cable assembly, RCR Semi-Flexible Series Cable Assembly, RCE Economy Ultra-Flexible Cable Assembly, RCM Economy Low-Loss Cable Assembly and Cable assembly overview.

How RCQ flexible interconnect compares with semi-rigid and armoured builds on a real test bench is covered in selecting a cable assembly above 18 GHz.

Showing all 27 results