BNC Adapter
Change a BNC port into another interface without disturbing the match: 37 BNC adapters are listed here, rated DC to 4 GHz, with variants specified to 18 GHz, in male-to-female, male-to-male and female-to-female bodies.
Mechanically these are two-stud bayonet on the BNC side, the quick-connect interface that is normally rated to 4 GHz. The bodies are single-piece, so the adapter can be tightened onto an instrument port without the centre contact rotating with it.
• Frequency: DC to 4 GHz, with variants specified to 18 GHz
• Impedance: 50 Ω nominal
• Interface: two-stud bayonet
• Transitions: BNC to SMA, N and 4mm
• Gender: male-to-female, male-to-male and female-to-female
• Body / plating: passivated stainless steel, nickel-plated brass and tri-metal plated brass bodies
• Grades stocked: Ultra / Economy
• Body styles: straight, right angle 90° and 4-hole flange
They turn up on VNA ports, in test fixtures, and at the end of cable assemblies made up in a different series. If the adapter sits inside a measurement, take Precision or Ultra; if it only has to carry a signal from one lead to another, Economy does it for less.
Frequently asked questions
What frequency range do BNC adapters cover?
DC to 4 GHz, with variants specified to 18 GHz. The ceiling is set by the BNC interface, so a BNC-to-BNC body reaches the full rating while a transition to a lower-frequency series is limited by the weaker of the two interfaces.
Will an adapter damage a mismatched port?
No. The risk is mechanical, not electrical: repeatedly mating an adapter with a worn or dirty interface is what wears a port out, which is why a sacrificial adapter on an instrument is cheaper than a repair.
How do I choose between Precision, Ultra and Economy grades?
Precision and Ultra parts are machined to tighter concentricity and belong inside calibration paths and millimeter-wave measurements. Economy parts use the same interface geometry in a lower-cost body, which suits production lines, incoming inspection and general patching.
See also BNC attenuators, BNC coaxial loads, SMA Adapter, N Adapter, 4mm Adapter and Impedance Adapter.
Showing all 37 results





































