RCR Semi-Flexible Series Cable Assembly
Assemblies in this series are built on RCR086H cable — RCR semi-flexible cable — and terminated on SSMP, 2.92mm, SMPM, SMA, SMP. They are cut to the length you specify and run DC to 40 GHz.
The cable construction — solder-sleeved semi-flexible core — is the reason this series exists, and it is aimed at fixed internal wiring where the cable must hold its shape. Assemblies are made to length, so a 300 mm jumper and a 5 m run use the same cable specification.
• Frequency: DC to 40 GHz
• Impedance: 50 Ω nominal
• Cable: RCR086H
• Connector options: SSMP, 2.92mm, SMPM, SMA, SMP
• Length: made to order, and marked on the assembly
The intended use is fixed internal wiring where the cable must hold its shape, and more generally anywhere a cable has to survive repeated connection without changing its electrical length. Because the assembly is tested as a unit, the loss you get is the loss of the part.
Frequently asked questions
How is phase stability defined?
Phase stability describes how much the electrical length changes when the cable is flexed or the temperature moves. This series is characterised for that behaviour, which is why it is used inside measurement paths rather than as general hook-up wire.
What length can I order?
Assemblies are cut to order. Give the length and the connector pair and the part is built and tested to that length. Very short assemblies are limited by the bend radius of the cable, very long ones by loss.
Which connectors can be fitted?
The listed options are SSMP, 2.92mm, SMPM, SMA, SMP. If your pair is not listed, send both interface types and the length — most combinations inside the same frequency class can be built.
See also RCA ultra-low loss phase-stable cable assembly, RCQ Flexible Interconnect Cable Assembly, RCP Armored Series Cable Assembly, RCE Economy Ultra-Flexible Cable Assembly and Cable assembly overview.
Showing all 7 results







