MMCX Adapter
These four MMCX adapters keep a 50 Ω line intact DC to 6 GHz, moving MMCX onto SMA without adding a cable and a second junction.
Mechanically these are micro snap-on on the MMCX side, the 6 GHz micro interface. The bodies are single-piece, so the adapter can be tightened onto an instrument port without the centre contact rotating with it.
• Frequency: DC to 6 GHz
• Impedance: 50 Ω nominal
• Interface: micro snap-on
• Transitions: MMCX to SMA
• Gender: male-to-female
• Body / plating: passivated stainless steel and gold-plated brass bodies
• Grades stocked: Economy
Use them to protect an instrument port from repeated mating, to convert a fixture to the connector the DUT actually has, or to join two cables of different series. The grade should follow the tolerance the measurement needs, not the price of the part.
Frequently asked questions
What frequency range do MMCX adapters cover?
DC to 6 GHz. The ceiling is set by the MMCX interface, so an MMCX-to-MMCX body reaches the full rating while a transition to a lower-frequency series is limited by the weaker of the two interfaces.
Will an adapter damage a mismatched port?
No. The risk is mechanical, not electrical: repeatedly mating an adapter with a worn or dirty interface is what wears a port out, which is why a sacrificial adapter on an instrument is cheaper than a repair.
How do I choose between Precision, Ultra and Economy grades?
Grade tracks mechanical tolerance, not interface type. Take Precision or Ultra when the adapter sits in a calibration path or above 26 GHz, and Economy when it is there to save a connector from wear on a production line.
See also SMA Adapter, N Adapter, 2.92mm Adapter, 3.5mm Adapter and RF adapter overview.
Showing all 4 results




