N Adapter
The N connector is the threaded 5/8-24 interface that outdoor RF has relied on for decades, and this page lists 110 adapters built on it: in-series N-to-N bodies plus between-series transitions to SMA, 3.5mm, 2.92mm, TNC, BNC, 4.3-10, L29 and HN. All are 50 ohm; standard bodies are rated to 11 GHz, precision bodies to 18 GHz.
What makes N worth its size is mechanical rather than electrical. The large thread and thick dielectric take cable weight and weather without the interface creeping loose, which is why it survives on mastheads and in enclosures where an SMA would be the wrong choice. Bodies here are passivated stainless steel, nickel-plated brass and tri-metal plated brass, in straight, right-angle and 4-hole flange styles.
Quick selection guide — N adapter families on this page:
In-series N–N | DC–11 GHz, precision to 18 GHz | 50 ohm | antenna runs, outdoor feeders
N–SMA | DC–11 to 18 GHz, set by the N side | 50 ohm | instrument panel to cable
N–3.5mm / 2.92mm | DC–18 and 40 GHz, set by the N side | 50 ohm | bridging outdoor runs to precision ports
N–TNC / BNC | DC–4 to 11 GHz | 50 ohm | legacy instruments and rack equipment
N–4.3-10 | DC–6 GHz, low-PIM options | 50 ohm | base station and DAS builds
N–L29 (7/16) | DC–7.5 GHz | 50 ohm | high-power and low-PIM feeder transitions
Bulkhead and 4-hole flange | DC–11 to 18 GHz | 50 ohm | panel and enclosure mounting
Choose by where the joint lives. Indoors on a bench, a precision N to 18 GHz is the honest choice. Outdoors, prioritise sealing and strain relief over the last fraction of a dB — a weatherproofed standard body beats a precision body with water in it. For PIM-sensitive sites, take the low-intermodulation parts and keep the mating surfaces clean and dry.
Frequently asked questions
What is the difference between N and SMA? Size, power handling and robustness. N uses a 5/8-24 thread and a much larger dielectric, so it handles more power and survives cable load and weather; SMA is smaller and tops out higher in frequency but is a bench interface, not an outdoor one.
Is N rated to 11 GHz or 18 GHz? Both, depending on grade. Standard N bodies are specified to 11 GHz; precision N bodies are specified to 18 GHz. Above 11 GHz, order the precision grade rather than pushing a standard body.
What torque should an N connector be tightened to? Typically 12 in-lb (about 1.35 N·m). A wrench matters more here than on SMA because the larger thread invites over-tightening by hand.
Are these 50 ohm? Yes. 75 ohm N exists for broadcast video but is a different product family; nothing on this page is 75 ohm. Use an impedance adapter if you must bridge the two.
Can N mate directly with 4.3-10? No. The two interfaces are not mechanically compatible despite similar frequency ranges; use a dedicated N-to-4.3-10 adapter.
How do I weatherproof an outdoor joint? Wrap the joint with self-amalgamating tape, keep the mating faces clean and dry, and provide strain relief so cable movement is not carried by the thread.
Related reading: SMA vs 2.92mm vs 2.4mm vs 1.85mm connector guide. For PIM-sensitive builds see low-intermodulation adapters; for bench transitions to precision ports see 2.92mm adapters.
Matching components in the same interface: N attenuators and N coaxial loads.
Further reading: RF connector body materials compared — brass, stainless and beryllium copper, and which one belongs on a test port.
Showing 1–40 of 110 results
2.92mm(K,SK) Female to N Female Adapter | Precision, DC-18GHz, Stainless Steel
2.92mm Adapter $93.004.3-10 Female to N Female Adapter | Economy, DC-6GHz, Brass with Tri-metal Plating
4.3-10 Adapter $27.004.3-10 Female to N Male Adapter | Economy, DC-6GHz, Brass with Tri-metal Plating
4.3-10 Adapter $31.00

![[Premium Pick] N Female to N Female Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N01.png)
![[Premium Pick] N Female to N Male Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N02.png)
![[Premium Pick] N Female to SMA Female Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N19.png)
![[Premium Pick] N Female to SMA Male Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N18.png)
![[Premium Pick] N Male to N Male Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N03.png)
![[Premium Pick] N Male to SMA Female Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N17.png)
![[Premium Pick] N Male to SMA Male Adapter | Precision, DC-18GHz, Stainless Steel](https://rfspect.com/wp-content/uploads/2026/09/RA18N16.png)
































