N Coaxial Load
The workhorse termination for power RF: this page lists 174 N coaxial loads, 50 ohm, rated DC to 18 GHz on standard bodies with variants specified to 26.5 and 33 GHz. Power runs from 1 W signal-level parts to 500 W finned high-power bodies, in male and female interfaces — the largest single load family in the catalog.
N loads take the jobs SMA cannot: antenna feeders, transmitter outputs, combiner ports, anywhere the cable is heavy and the power is real. Anti-pulse variants are stocked for radar and TWT work where the load has to survive repeated high-energy pulses. Plating is passivated stainless steel, nickel-plated brass and ternary-alloy plated brass.
Quick selection guide — N load families on this page:
Low power (1-5 W) | DC–18 GHz | instrument and combiner port termination
Medium power (10-50 W) | DC–12.4/18 GHz | amplifier outputs
High power (100-500 W) | DC–6 GHz, finned body | transmitter and feeder termination
Anti-pulse variants | DC–18 GHz | radar and pulsed-power systems
Extended-frequency variants | DC–26.5/33 GHz | precision and mmWave-adjacent ports
The 500 W bodies are heatsinks with an N connector on them. Derating applies above room temperature and without airflow — the datasheet curve, not the headline wattage, is the safe operating point.
Frequently asked questions
Why is N the default high-power load interface? The large dielectric and thread spread heat and mechanical load; that is why the 100-500 W bodies in this catalog are N, and why SMA loads stop at 100 W.
What is an anti-pulse load? A termination whose resistor network is built to absorb short, high-energy pulses repeatedly without drifting — radar, TWT and pulsed-amplifier work.
Does gender matter? A load has one connector; match it to the port. Male N load goes on a female N port, and vice versa.
Can an N load be used outdoors? The interface is weather-resistant; the joint still wants tape, and the finned body wants drainage so water does not sit in the fins.
How accurate is the termination at band edge? VSWR widens with frequency on every load. Precision bodies hold the tightest match; the datasheet gives the full-band curve.
Do loads wear out? Slowly — heat cycles age the resistor film. A load that has been run hot for years can drift out of its VSWR specification; calibration labs re-verify loads periodically for exactly this reason.
Related: N adapters, N attenuators, the full coaxial load catalog, and our connector selection guide.
Showing 1–40 of 174 results

![[Clearance] N Male Medium-Power Coaxial Termination | Professional, DC-6GHz, 15 W, Round, Ternary Alloy Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT615NM.png)
![[Clearance] N Male Medium-Power Coaxial Termination | Professional, DC-6GHz, 25 W, Round, Ternary Alloy Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT625NM.png)
![[Clearance] N Male Medium-Power Coaxial Termination | Professional, DC-6GHz, 30 W, Round, Ternary Alloy Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT630NM.png)
![[Clearance] N Male Medium-Power Coaxial Termination | Professional, DC-8.5GHz, 20 W, Round, Ternary Alloy Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT820NM.png)
![[Clearance] QN Male Coaxial Termination | DC-6GHz, 5 W, Round, Ternary Alloy Plated Brass Connector, Quick-Connect](https://rfspect.com/wp-content/uploads/2026/09/RT65QNM.png)
![[Clearance] RP-SMA Male (Reverse Polarity) Coaxial Termination | Reverse Polarity, DC-18GHz, 5 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RPT18S5M.png)
![[Clearance] SMA Male Coaxial Termination | Professional, DC-6GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT62SM.png)
![[Clearance] SMA Male Medium-Power Coaxial Termination | Professional, DC-6GHz, 20 W, Round, Ternary Alloy Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT620SM.png)
![[Clearance] SMA Male Medium-Power Coaxial Termination | Professional, DC-8.5GHz, 25 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT825SM.png)
![[Discontinued] 3.5mm Female High-Precision Coaxial Termination | DC-26.5GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT272F.png)
![[Discontinued] 3.5mm Female High-Precision Millimeter-Wave Coaxial Termination | DC-33GHz, 1 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT331F.png)
![[Discontinued] 3.5mm Male High-Precision Millimeter-Wave Coaxial Termination | DC-33GHz, 1 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT331M.png)
![[Discontinued] SMA Female High-Precision Coaxial Termination | DC-18GHz, 1 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT181SF.png)
![[Premium Pick] N Male Coaxial Termination | Economy, DC-18GHz, 2 W, Round, Nickel-Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182NM-NBA.png)























