RCQ260-SMWSMW-L replaces hand-fitted connectors with a factory build: SMA Right Angle 90° Male on one end, SMA Right Angle 90° Male Flexible Interconnect on the other, RCQ260 cable, tested as a whole before it ships.
Both ends are male, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
Loss is the number to budget: 3.8 dB per metre at 18 GHz maximum, multiplied by the length you order, plus the connectors.
Match is specified at VSWR 1.4:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 18 GHz; 3.8 dB/m max at 18 GHz; VSWR 1.4:1 max; 50 ohm impedance.
The L suffix in the part number stands for cut-to-length: you specify the finished length, and every assembly is checked before despatch.
System builders use it for the permanent RF runs inside a rack, where the cable is routed once and has to keep performing for years.
FAQ – How is it tested before shipping? Each assembly is continuity-checked and insertion-loss tested, and the results are tied to the part number and length marked on the jacket.
FAQ – What bend radius should I respect? The datasheet gives the minimum bend radius of the cable. Tighter bends raise the loss and, over time, shift the match; route with a generous margin.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.







Reviews
There are no reviews yet.