A factory-terminated assembly, RCQ260-PFWPF-L runs SMP(GPO) Right Angle 90° Female to SMP(GPO) Female Flexible Interconnect on RCQ260 cable, specified from DC to 18 GHz and ordered by length.
Both ends are female, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
The datasheet quotes 3.8 dB maximum insertion loss per metre at 18 GHz; the actual assembly is tested to that figure before it ships.
Match is specified at VSWR 1.4:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 18 GHz; 3.8 dB/m max at 18 GHz; VSWR 1.4:1 max; 50 ohm impedance.
Order by length: the trailing L in the part number marks it as a cut-to-length assembly, so give the finished length per piece and the quantity, and the assembly arrives tested and labelled.
It suits production fixtures and laboratory racks alike, wherever a permanent, repeatable cable path beats a coil of bare cable and hand-fitted connectors.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.
FAQ – Does the length change the phase? Yes, phase scales with electrical length. If phase matters, order the assembly to a stated electrical length tolerance rather than a mechanical one.
FAQ – Can a damaged assembly be repaired? Usually the ends can be re-terminated once, provided there is enough cable left. Armoured and semi-flexible types are less forgiving; replacing the assembly is often quicker.







Reviews
There are no reviews yet.