The 2.4mm Male to 2.4mm Male Millimeter-Wave Semi-Rigid assembly RCS086L-UMUM-L1-L2 is built on the RCS086L cable and covers DC to 50 GHz; order it cut to length.
Both ends are male, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
FAQ – Can a damaged assembly be repaired? Usually the ends can be re-terminated once, provided there is enough cable left. Armoured and semi-flexible types are less forgiving; replacing the assembly is often quicker.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.
The assembly is built for millimetre-wave work, where cable and connector tolerances dominate the measured performance.
Loss is the number to budget: 5.43 dB per metre at 50 GHz maximum, multiplied by the length you order, plus the connectors.
Match is specified at VSWR 1.35:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 50 GHz; 5.43 dB/m max at 50 GHz; VSWR 1.35:1 max; 50 ohm impedance.
Lengths are made to order: state the finished length and quantity, and each assembly is terminated, tested and labelled before it ships.
System builders use it for the permanent RF runs inside a rack, where the cable is routed once and has to keep performing for years.
FAQ – Does the length change the phase? Yes, phase scales with electrical length. If phase matters, order the assembly to a stated electrical length tolerance rather than a mechanical one.







Reviews
There are no reviews yet.