A standard SMA termination, RT1810SM-NBA presents a matched 50 ohm load at a male interface from DC to 18 GHz.
Low dissipation means the body can stay minimal: a short in-line termination that can live on a spare port indefinitely.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
The DC to 18 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 10 W dissipation; VSWR 1.3:1 max; 50 ohm impedance; DC to 18 GHz; nickel-plated brass body.
In service it usually sits where a signal would otherwise hit an open circuit: on standby outputs, at the ends of unterminated lines, and across power splitters during testing.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.







Reviews
There are no reviews yet.