Ultra-grade 2.92mm load, RT402F converts whatever reaches it into heat instead of a reflection, up to 40 GHz and 2 W. The headline figures are a VSWR of 1.15:1 maximum and 2 W of dissipation, all specified across the full DC to 40 GHz band rather than at spot frequencies. The body screws straight onto the port and needs no mounting hardware, which is why a termination can live on a spare port indefinitely. It is built in the Ultra tier, the tightest tolerance class of this interface family, intended for daily precision work.
Specifications
- Interface: 2.92mm, female
- Power: 2 W
- Frequency: DC to 40 GHz
- Impedance: 50 ohm
- VSWR: 1.15:1 maximum
- Body: passivated stainless steel
- Weight: 0.08 kg
- Grade: Ultra
Where it is used
Transmitter and amplifier testing uses it to absorb full output power into a known load instead of radiating it. In receive systems it terminates spare inputs so local leakage and interference do not find a path back into the front end.
It is also the part that protects a transmitter from itself: without a load, an unkeyed amplifier sees an open circuit and the output stage takes the strain.
40 GHz is where air-dielectric construction earns its price; a PTFE interface would not hold the match this far up.
Compatibility and mating
The 2.92mm interface is mechanically compatible with SMA and 3.5mm, which is convenient and also the main risk: a worn SMA plug can damage a precision 2.92mm socket. Inspect before every mating and torque to about 0.9 N·m.
The interface follows the series standard, so the termination fits any cable or port of that type; what changes between loads is the power handling and the body, not the mating plane.
Store it capped. A mating plane that has collected grit will score the dielectric the first time it is torqued down.
Ordering
Every unit ships with its datasheet, and the outline drawing in it is the reference for panel cut-outs and mounting hole spacing. Check it before designing a fixture around the part.
Frequently asked questions
Why does it get warm?
All the absorbed power becomes heat in the element. A warm body at rated power is normal operation.
Will it protect my receiver?
It protects the port from reflections, not from over-voltage. For front-end protection use a limiter, not a load.
Can I use it outdoors?
Only with a weatherproofed interface. The body itself is metal, but the mating plane is not sealed unless stated.
Does orientation matter?
For finned bodies, yes: mount with the fins vertical and in free air, or the rating drops.
Is there a DC path?
Most coaxial terminations present a resistive DC path; if your circuit needs a block, fit one in line.



![[Premium Pick] N Male Coaxial Termination | Economy, DC-18GHz, 2 W, Round, Nickel-Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182NM-NBA.png)

![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-18GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182SME.png)

Reviews
There are no reviews yet.