The RT425SM is a SMA coaxial termination: male interface, 25 W of dissipation, specified from DC to 4 GHz.
A medium-power element needs more heat path than a bench pad, so the body is extended or finned and rated for continuous free-air operation.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
From DC to 4 GHz the termination holds its VSWR figure; above the limit the match degrades, which matters if you rely on the load to absorb reflected power.
Key numbers: 25 W dissipation; VSWR 1.15:1 max; 50 ohm impedance; DC to 4 GHz; passivated stainless steel body.
It belongs on any port that would otherwise bounce energy back down the line: spare outputs, alignment set-ups, and the output side of amplifiers being characterised.
FAQ – Is ‘dummy load’ something different again? It is a third name for the same component: a connectorised resistor that soaks up RF power instead of reflecting it.







Reviews
There are no reviews yet.