,

2.4mm Female to 2.4mm Female Hermetically Sealed Bulkhead Millimeter-Wave Adapter | Precision, DC-50GHz, Stainless Steel

$1,179.00

+ Free Shipping
SKU: RAHS50U01Y Categories: ,

RAHS50U01Y is the between-series part you reach for when a 2.4mm Female cable has to meet a 2.4mm Female instrument port, rated to 50 GHz.

At a glance

  • Frequency: DC to 50 GHz
  • Impedance: 50 Ω
  • VSWR: 1.5:1 max
  • Interfaces: 2.4mm Female / 2.4mm Female
  • Body and contact: Stainless Steel
  • Grade: Precision

How it is used

At 50 GHz and above the adapter is part of the calibration, not an accessory. It usually sits at the device plane to convert between 1.85mm, 2.4mm and 2.92mm families, and its condition directly shows up as ripple in the sweep. Both ends are female, so this part supplies the male interface on either side — the usual answer when two cables have to meet without a bulkhead in between.

What it mates with

2.4mm mates only with 1.85mm and other 2.4mm parts. It deliberately does not mate with SMA, which is what stops a 50 GHz port being damaged by a mis-threaded connector. 2.4mm is the interface most 50 GHz instruments carry, and its air line is the reason it refuses an SMA thread. Two parts worth comparing are 2.4mm Male to 2.92mm(K,SK) Male Right Angle 90° Millimeter-Wave Adapter (RA4006WH) and 1.85mm Male to 2.4mm Male Millimeter-Wave Adapter (RA5004H) — same interface family, different grade or body style, so the choice usually comes down to the frequency headroom you need rather than to the price.

A common question

Can this adapter be used below its rated frequency?
Yes, and it will generally measure better there. Running a millimetre-wave adapter at a lower band is harmless; the reverse — running a low-band part near its cutoff — is where the match and the repeatability fall apart.

RAHS50U01Y datasheet preview – click to view full PDF

Weight0.03 kg
Dimensions6 × 3 × 3 cm
Connector Type

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “2.4mm Female to 2.4mm Female Hermetically Sealed Bulkhead Millimeter-Wave Adapter | Precision, DC-50GHz, Stainless Steel”

Your email address will not be published. Required fields are marked *