A straight 50 ohm part, RA3406H converts a 2.92 mm male interface to a 3.5 mm female interface across the DC to 34 GHz band.
One end is male and the other female, so match each end against the cable or port it has to meet.
Up here the adapter is a precision part: alignment, concentricity and a clean mating plane matter more than the cable attached to it. The passivated stainless body holds its dimensions through thousands of mating cycles and resists corrosion on repeatedly handled parts.
Key numbers: VSWR 1.2:1 max; insertion loss 0.20 dB max (<= 0.05 sqrt-f GHz); 50 ohm impedance; passivated stainless steel body.
FAQ – Is it bidirectional? Yes. An adapter is a passive reciprocal two-port, so it works the same way round; only the mechanical mounting differs.
FAQ – What torque should I use? Use the torque recommended for the interface standard of each end. Over-tightening is the usual cause of a damaged mating plane.
The straight body keeps the signal path axial, the shortest and lowest-reflection layout when the chassis has room. Field kits and spares boxes are another natural home: one part covers the conversion, so the kit stays small.
FAQ – What is the worst-case loss? The datasheet below lists maximum insertion loss; the 0.20 figure applies across the band.







Reviews
There are no reviews yet.