,

BNC Medium-Power Coaxial Fixed Attenuator | Professional, DC-6GHz, 25 W, 1-60 dB, Unidirectional, Female Input, Female Output, Round, Tri-metal Plated Brass Connector

$216.00

+ Free Shipping
SKU: R6B25FF-XX Categories: ,

The R6B25FF-XX pads a BNC line by 1-60 dB with a 25 W body, from DC to 6 GHz. The headline figures are a VSWR of 1.25:1 maximum, attenuation over 1-60 dB and 25 W of dissipation, all specified across the full DC to 6 GHz band rather than at spot frequencies. The in-line body sits between the two connectors and keeps the run straight, so the pad drops the level without adding a bend to the path. It is built in the Professional tier, the standard professional build for laboratory and production use.

Specifications

  • Interface: BNC, genders as listed
  • Attenuation: 1-60 dB
  • Power: 25 W
  • Frequency: DC to 6 GHz
  • Impedance: 50 ohm
  • VSWR: 1.25:1 maximum
  • Body: tri-metal plated brass
  • Centre contact: gold-plated beryllium copper centre contact
  • Weight: 0.05 kg
  • Grade: Professional

Where it is used

It is also a matching tool: a pad improves the effective return loss seen by either side of the connection. Production test uses it to standardise levels between stations, so a reading taken at one bench means the same at the next.

Because it is passive and has no controls, it cannot be knocked out of setting between shifts, which matters on a production line.

This is the low band, where the wavelength is long enough that connector geometry is forgiving and the match is set by the interface rather than the body.

Compatibility and mating

BNC is a bayonet interface: push and twist a quarter turn. It is fast, which is why video and lab racks still use it, but it is not a precision connection and should not be expected to hold a tight match at the top of its band.

The interfaces follow the series standard, so the pad fits any cable or port of that type; the value and the power rating, not the mating geometry, are what change between parts.

Store it capped. A mating plane that has collected grit will score the dielectric the first time it is torqued down.

Ordering

The SKU is the order code. If you need a different interface pair, a different gender combination or a longer body, ask before ordering rather than adapting this part on site.

Frequently asked questions

Can I get a different value?
The value range in the title is what this listing covers. Other values in the same family are separate SKUs; ask if you need a step that is not listed.

Can it be used at higher frequency?
Only up to the rated band. Above it the element is no longer a pure resistance and the attenuation and match both drift.

Why does it get warm?
It converts the removed power into heat. A warm body at rated power is normal; a hot body means the rating or the derating is being ignored.

Will it improve my return loss?
Yes, a pad isolates the two sides: a 6 dB pad improves the match seen by roughly 12 dB. That is why pads are used to stabilise a measurement.

Is the DC path continuous?
Yes for a coaxial fixed pad: it passes DC as well as RF. Check the datasheet if your circuit cannot tolerate a DC path.

R6B25FF-XX datasheet preview – click to view full PDF

Weight 0.05 kg
Dimensions 8 × 5 × 4 cm
Connector Type

Max Frequency

Reviews

There are no reviews yet.

Be the first to review “BNC Medium-Power Coaxial Fixed Attenuator | Professional, DC-6GHz, 25 W, 1-60 dB, Unidirectional, Female Input, Female Output, Round, Tri-metal Plated Brass Connector”

Your email address will not be published. Required fields are marked *