A fixed N High-Power attenuator, R12N100FFU-XX holds 6-60dB across DC to 12.4 GHz at 100 W of input power.
A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.
Key numbers: attenuation 6-60dB; 100 W power; VSWR 1.35:1 max; 50 ohm impedance; metal body.
Typical use is protecting a receiver or spectrum-analyser front end from an over-level signal, or setting a known level into a device under test.
FAQ – What happens above 12.4 GHz? The attenuation accuracy and VSWR are specified to 12.4 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.
FAQ – Will it change my VSWR? A fixed resistive pad actually improves the match seen by both sides, because the attenuating network absorbs reflections. The VSWR figure below is the number to design against.
Connect it the way the title states: input takes the source, output feeds the load. The rating difference between the two ends is deliberate.
At 100 W of dissipation the body is sized to take continuous input at that level; the resistive element and its heat path are matched to it, which is why the rating is a hard number rather than a guideline.
The DC to 12.4 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.
FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.







Reviews
There are no reviews yet.