A straight 50 ohm part, RA34SA03 converts an SSMA male interface to a second SSMA female interface across the DC to 33 GHz band.
One end is male and the other female, so match each end against the cable or port it has to meet.
Into Ka-band territory, mating-plane alignment and cleanliness dominate the measured VSWR. The passivated stainless body holds its dimensions through thousands of mating cycles and resists corrosion on repeatedly handled parts.
Key numbers: VSWR 1.2:1 max; insertion loss 0.45 dB max (<= 0.09 sqrt-f GHz); 50 ohm impedance; passivated stainless steel body.
FAQ – Is it bidirectional? Yes. An adapter is a passive reciprocal two-port, so it works the same way round; only the mechanical mounting differs.
FAQ – What torque should I use? Use the torque recommended for the interface standard of each end. Over-tightening is the usual cause of a damaged mating plane.
The straight body keeps the signal path axial, the shortest and lowest-reflection layout when the chassis has room. Field kits and spares boxes are another natural home: one part covers the conversion, so the kit stays small.
FAQ – Can I run it above 33 GHz? The part is specified to 33 GHz. Above that the VSWR and loss figures are no longer guaranteed, so treat it as out of band.







Reviews
There are no reviews yet.