A ultra-grade body, two interfaces, one job: RA06B03 carries BNC Female on one end and N Male on the other, to 18 GHz.
Electrical and mechanical
- Frequency: DC to 18 GHz
- Impedance: 50 Ω
- VSWR: 1.2:1 max
- Insertion loss: 0.25 dB max
- Interfaces: BNC Female / N Male
- Body and contact: Stainless Steel & Beryllium Copper
- Grade: Ultra
How it is used
Service replacements are the other use: when a panel connector reaches the end of its mating life, an adapter restores the interface without re-terminating anything behind the panel. One jack and one plug, in that order. The jack is the end that takes a cable plug, the plug is the end that goes into a fixed port; if the fixture is wired the other way round the adapter will not seat, and forcing it is how a centre contact gets pushed back.
Mating and compatibility
BNC is a bayonet interface with no torque setting. A standard BNC is a DC–4 GHz connector; the 18 GHz version in the catalogue is a precision build rather than a general rule, so read the part’s own rating rather than the interface name. Type N carries more power than SMA at a lower frequency ceiling, and that trade is its whole purpose. Two parts worth comparing are BNC Male to SMA Female Adapter (RA06B07) and BNC Male to SMA Male Adapter (RA06B06) — same interface family, different grade or body style, so the choice usually comes down to the frequency headroom you need rather than to the price.
A common question
Do I need a torque wrench here?
For anything above 18 GHz, yes. Below that a hand-tight connection is usually adequate provided the interfaces are clean and the cable is supported.







Reviews
There are no reviews yet.