Who writes these guides
Everything in the RFSPECT knowledge base is written and checked by the engineering team that designs our coaxial components in Shenzhen: in-series and between-series adapters, fixed attenuators, terminations and phase-stable cable assemblies covering DC to 110 GHz.
That means the person writing about 1.0 mm mating torque is the same person who signs off the drawing for an RA6705H, and the loss figures in an article come from the same test bench that qualifies the parts.
How we source the numbers
- Specifications come from datasheets, not marketing copy. When we quote VSWR 1.25:1 max or 0.40 dB insertion loss, that is the guaranteed column of the drawing, not a typical value measured on a golden sample.
- Typical and guaranteed are labelled separately. Most of the confusion in RF datasheets comes from mixing the two, so we say which one we mean.
- Formulas are shown, not summarised. Return loss, VSWR, reflection coefficient and the 0.06 × √f loss rule are written out so you can reproduce the arithmetic on your own data.
- Measured data is dated. When a chart comes from our bench rather than a calculation, the test setup and date are stated.
What we publish
Three kinds of pages, and nothing else:
- Selection guides — how to choose between interfaces that look alike, such as SMA, 2.92mm, 2.4mm and 1.85mm.
- Measurement explainers — how to read the numbers on a datasheet and build a budget that closes, for example reading VSWR and insertion loss.
- Product notes — the application, the mating rules and the failure modes for a specific part family, such as the 1.0 mm adapter range.
We do not publish competitor teardowns, listicles or rewritten datasheet text. If a page does not help you choose a part or read a measurement, it does not belong here.
Corrections
If a number here disagrees with the drawing you received, the drawing wins and we want to know. Send the part number and the page to our contact page and we will correct the article and note the change.
Where to start
New to the catalogue: begin with the RF adapter overview, then narrow by interface. Working on a bench problem: the VSWR and insertion loss guide covers the arithmetic and the loss budget in one pass.
