A high-power N termination, RT18250NFA presents a matched 50 ohm load at a female interface from DC to 18 GHz.
The power rating puts it in the high-power class: the resistive element sits in a substantial heatsink body, and the shape of that body is part of the thermal design, not styling.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
The rectangular body is a finned heatsink: mount it with the fins vertical and it holds its rating indefinitely.
The DC to 18 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 250 W dissipation; VSWR 1.45:1 max; 50 ohm impedance; DC to 18 GHz; passivated stainless steel body.
It is the part you reach for when a transmission has to go somewhere safe: transmitter burn-in, filter alignment, and any test that needs the line to see a clean 50 ohms.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.



![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-18GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182SME.png)


![[Premium Pick] 2.92mm(K,SK) Male Millimeter-Wave Coaxial Termination | Professional, DC-40GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT402MX.png)
Reviews
There are no reviews yet.