RT6100NFA terminates a N line in 50 ohms through a female interface, taking 100 W from DC to 6 GHz.
The power rating puts it in the high-power class: the resistive element sits in a substantial heatsink body, and the shape of that body is part of the thermal design, not styling.
Typical use is leaving an unused port terminated, dummy-loading a transmitter during alignment, or providing a stable 50 ohm sink at the far end of a line under test.
FAQ – Is ‘dummy load’ something different again? It is a third name for the same component: a connectorised resistor that soaks up RF power instead of reflecting it.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
The rectangular body is a finned heatsink: mount it with the fins vertical and it holds its rating indefinitely.
The DC to 6 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 100 W dissipation; VSWR 1.2:1 max; 50 ohm impedance; DC to 6 GHz; ternary alloy plated brass body.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.





![[Premium Pick] SMA Male Coaxial Termination | Economy, DC-18GHz, 1 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT181SME.png)
![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-18GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182SME.png)
Reviews
There are no reviews yet.