The RA5012 is a 50 ohm coaxial adapter that joins a 1.0 mm female interface to a 2.4 mm female interface in one straight body, specified from DC to 50 GHz.
Both ends are female, so it joins two ports or cables of the same sex; the part number states the pairing.
Key numbers: VSWR 1.25:1 max; 50 ohm impedance; passivated stainless steel body.
FAQ – What is the worst-case loss? The datasheet below lists maximum insertion loss; the datasheet figure applies across the band.
FAQ – Can I run it above 50 GHz? The part is specified to 50 GHz. Above that the VSWR and loss figures are no longer guaranteed, so treat it as out of band.
The straight body keeps the signal path axial, the shortest and lowest-reflection layout when the chassis has room. Common applications are test jigs, instrument front ends and module-to-module links inside an enclosure.
Above 40 GHz the adapter is a metrology-grade component; handle the mating plane with the same care as the instrument port itself. The passivated stainless body holds its dimensions through thousands of mating cycles and resists corrosion on repeatedly handled parts.
FAQ – Will it fit my existing cable? It mates with standard interfaces on both ends. Check the connector family and gender of your cable against each end before ordering.
This body belongs to our 1.0 mm adapter range, and the other end matches our 2.4 mm adapters. Choosing between connector families is covered band by band in the SMA vs 2.92mm vs 2.4mm vs 1.85mm guide.










Reviews
There are no reviews yet.