The RA5001YH is a 50 ohm coaxial adapter that joins a 2.4 mm female interface to a second 2.4 mm female interface in one bulkhead body, specified from DC to 50 GHz.
Both ends are female, so it joins two ports or cables of the same sex; the part number states the pairing.
FAQ – Is it bidirectional? Yes. An adapter is a passive reciprocal two-port, so it works the same way round; only the mechanical mounting differs.
FAQ – What torque should I use? Use the torque recommended for the interface standard of each end. Over-tightening is the usual cause of a damaged mating plane.
The bulkhead barrel passes through a panel and anchors on both sides, giving a sealed feed-through. It shows up most often in lab test set-ups and production fixtures, where one port type has to serve devices terminated in the other.
Above 40 GHz the adapter is a metrology-grade component; handle the mating plane with the same care as the instrument port itself. The passivated stainless body holds its dimensions through thousands of mating cycles and resists corrosion on repeatedly handled parts.
Key numbers: VSWR 1.2:1 max; insertion loss 0.25 dB max (<= 0.05 sqrt-f GHz); 50 ohm impedance; passivated stainless steel body.
FAQ – What is the worst-case loss? The datasheet below lists maximum insertion loss; the 0.25 figure applies across the band.







Reviews
There are no reviews yet.