Where a 2.92mm port has to be left matched, RT4015F does the job: a female 50 ohm termination rated 15 W, DC to 40 GHz.
The rating sits between bench pads and rack loads: the body carries enough metal to run at rated power for hours, with no fan and no derating curve below the limit.
It is the part you reach for when a transmission has to go somewhere safe: transmitter burn-in, filter alignment, and any test that needs the line to see a clean 50 ohms.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
The DC to 40 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 15 W dissipation; VSWR 1.26:1 max; 50 ohm impedance; DC to 40 GHz; passivated stainless steel body.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.






![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-18GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182SME.png)
Reviews
There are no reviews yet.