RCP670E-KFKF-L saves the soldering: a 2.92mm(K,SK) Female to 2.92mm Female High-Performance Armored assembly on RCT400 cable, made to the length you need and tested before shipping.
Both ends are female, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
The datasheet quotes 3.16 dB maximum insertion loss per metre at 40 GHz; the actual assembly is tested to that figure before it ships.
Match is specified at VSWR 1.3:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 40 GHz; 3.16 dB/m max at 40 GHz; VSWR 1.3:1 max; 50 ohm impedance.
The assembly is ordered by finished length and shipped tested, with the length and part number marked so it can be traced back to its build record.
Typical use is the fixed cabling of a test bench: instrument to fixture, filter to analyser, or anywhere a flexible run has to hold its performance for the life of the set-up.
FAQ – Can a damaged assembly be repaired? Usually the ends can be re-terminated once, provided there is enough cable left. Armoured and semi-flexible types are less forgiving; replacing the assembly is often quicker.
FAQ – Does the length change the phase? Yes, phase scales with electrical length. If phase matters, order the assembly to a stated electrical length tolerance rather than a mechanical one.
The armour layer protects the core from crush, tension and abrasion, which is what keeps the electrical performance stable once the assembly has been routed, clamped and walked past a few hundred times. The cable is the high-performance type of the series: tighter tolerances on the electricals and better consistency from unit to unit.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.







Reviews
There are no reviews yet.