RT4035M terminates a 2.92mm line in 50 ohms through a male interface, taking 35 W from DC to 40 GHz.
Dissipation is handled by convection through an extended body, which keeps the part silent and maintenance-free while it sits on a live port.
Key numbers: 35 W dissipation; VSWR 1.3:1 max; 50 ohm impedance; DC to 40 GHz; passivated stainless steel body.
In service it usually sits where a signal would otherwise hit an open circuit: on standby outputs, at the ends of unterminated lines, and across power splitters during testing.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.
The round in-line body suits panel jacks and bench use, where it hangs on the port and convects freely.
From DC to 40 GHz the termination holds its VSWR figure; above the limit the match degrades, which matters if you rely on the load to absorb reflected power.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.





![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-26.5GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT272SM.png)

Reviews
There are no reviews yet.