RT405M terminates a 2.92mm line in 50 ohms through a male interface, taking 5 W from DC to 40 GHz.
The compact in-line body is appropriate here: the element dissipates its rated power without needing fins, so the part stays small and unobtrusive on the port.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
The round in-line body suits panel jacks and bench use, where it hangs on the port and convects freely.
The DC to 40 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 5 W dissipation; VSWR 1.26:1 max; 50 ohm impedance; DC to 40 GHz; passivated stainless steel body.
In service it usually sits where a signal would otherwise hit an open circuit: on standby outputs, at the ends of unterminated lines, and across power splitters during testing.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.



![[Premium Pick] BNC Male Coaxial Termination | Economy, DC-8GHz, 2 W, Round, Nickel-Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT82BM-NBA.png)


![[Premium Pick] SMA Male Coaxial Termination | Economy, DC-18GHz, 1 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT181SME.png)
Reviews
There are no reviews yet.