This is the finished version of the RCT500 cable: 3.5mm Female to 3.5mm Female High-Performance Armored, cut to your length, with the performance of the cable preserved by factory termination.
Both ends are female, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
Key numbers: DC to 26.5 GHz; 2.23 dB/m max at 26.5 GHz; VSWR 1.25:1 max; 50 ohm impedance.
The L suffix in the part number stands for cut-to-length: you specify the finished length, and every assembly is checked before despatch.
Typical use is the fixed cabling of a test bench: instrument to fixture, filter to analyser, or anywhere a flexible run has to hold its performance for the life of the set-up.
FAQ – Can a damaged assembly be repaired? Usually the ends can be re-terminated once, provided there is enough cable left. Armoured and semi-flexible types are less forgiving; replacing the assembly is often quicker.
FAQ – Does the length change the phase? Yes, phase scales with electrical length. If phase matters, order the assembly to a stated electrical length tolerance rather than a mechanical one.
The armour layer protects the core from crush, tension and abrasion, which is what keeps the electrical performance stable once the assembly has been routed, clamped and walked past a few hundred times. The cable is the high-performance type of the series: tighter tolerances on the electricals and better consistency from unit to unit.
Loss is the number to budget: 2.23 dB per metre at 26.5 GHz maximum, multiplied by the length you order, plus the connectors.
Match is specified at VSWR 1.25:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.







Reviews
There are no reviews yet.