The N Male to N Male Economy Low-Loss assembly RCM400-NMNM-L is built on the RCM400 cable and covers DC to 3 GHz; order it cut to length.
Both ends are male, so the assembly joins two ports or cables of the opposite sex; the pairing is stated in the part number.
System builders use it for the permanent RF runs inside a rack, where the cable is routed once and has to keep performing for years.
FAQ – Can a damaged assembly be repaired? Usually the ends can be re-terminated once, provided there is enough cable left. Armoured and semi-flexible types are less forgiving; replacing the assembly is often quicker.
FAQ – Does the length change the phase? Yes, phase scales with electrical length. If phase matters, order the assembly to a stated electrical length tolerance rather than a mechanical one.
The cable is a low-loss type, so longer runs stay inside a reasonable loss budget.
Loss is the number to budget: 0.74 dB per metre at 3 GHz maximum, multiplied by the length you order, plus the connectors.
Match is specified at VSWR 1.25:1 maximum; on a healthy assembly most of the reflection sits at the two connector interfaces, which is why mating-plane care matters even on a cable.
Key numbers: DC to 3 GHz; 0.74 dB/m max at 3 GHz; VSWR 1.25:1 max; 50 ohm impedance.
The assembly is ordered by finished length and shipped tested, with the length and part number marked so it can be traced back to its build record.
FAQ – Are both connector genders available? Yes, the title states the pairing. If the combination you need is not listed, most pairings within the same frequency class can be built to order.







Reviews
There are no reviews yet.