R12S5-XX is the SMA fixed attenuator in this range: 1-60 dB of attenuation, 5 W dissipation, specified DC to 12.4 GHz.
A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.
The DC to 12.4 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.
Key numbers: attenuation 1-60 dB; 5 W power; VSWR 1.25:1 max; 50 ohm impedance; passivated stainless steel body.
Field engineers carry them for the opposite reason: when the reading is over range, the pad brings the signal back inside the instrument’s window.
FAQ – What happens above 12.4 GHz? The attenuation accuracy and VSWR are specified to 12.4 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.
FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.
The pad is bidirectional, so attenuation is the same whichever way the signal runs; that suits lines where power can arrive from either direction.
The 5 W rating is a continuous rating with the body in free air; derate it if the pad is boxed up against other hot components.
FAQ – Which end takes the power? For bidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.




![[Premium Pick] SMA Coaxial Fixed Attenuator | Professional, DC-26.5GHz, 2 W, 1-30 dB, Bidirectional, Male-Female, Round, Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/R27S2-XX.png)


Reviews
There are no reviews yet.