RT1225SF terminates a SMA line in 50 ohms through a female interface, taking 25 W from DC to 12.4 GHz.
Dissipation is handled by convection through an extended body, which keeps the part silent and maintenance-free while it sits on a live port.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
FAQ – Can it measure power? No, it absorbs power without indicating it. To measure, use a power sensor, or sample the line with a coupler into a sensor.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
The DC to 12.4 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 25 W dissipation; VSWR 1.25:1 max; 50 ohm impedance; DC to 12.4 GHz; passivated stainless steel body.
In service it usually sits where a signal would otherwise hit an open circuit: on standby outputs, at the ends of unterminated lines, and across power splitters during testing.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.






![[Premium Pick] SMA Male Coaxial Termination | Professional, DC-18GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182SME.png)
Reviews
There are no reviews yet.