,

SMA Male 50Ω to BNC Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel & Nickel-Plated Brass

$247.00

+ Free Shipping
SKU: RAMP03S04 Categories: ,

Where a 50 ohm port meets a 75 ohm device, RAMP03S04 makes the transition in a single precision body, DC to 3 GHz.

The conversion is done by a resistive network, not a transformer: the mismatch is absorbed as a defined loss, which keeps the measurement repeatable.

Use it when a 75 ohm device has to be measured on a 50 ohm analyser, or when a 50 ohm source feeds a 75 ohm distribution network. The pad makes the error a known constant instead of a cable-dependent unknown.

FAQ – Why not just use a plain barrel? A barrel leaves the impedance step in place, so part of the power reflects and readings depend on the surrounding electrical length. The matching pad trades that reflection for a fixed, repeatable loss.

FAQ – Does direction matter? Order by the 50 ohm connector you have and the 75 ohm connector you need. The pad is electrically symmetrical, but the two interface families are not interchangeable.

Connect SMA Male 50Ω on the instrument side and BNC Female 75Ω on the network side; each side is labelled by its connector and impedance in the part number.

Key numbers: 50 ohm to 75 ohm matching pad; DC to 3 GHz; VSWR 1.25:1 max; passivated stainless steel body.

FAQ – How much loss does the pad add? The theoretical minimum for a 50/75 ohm matching pad is about 5.7 dB; the exact figure for each part is stated in its specification.

RAMP03S04 datasheet preview – click to view full PDF

Weight 0.03 kg
Dimensions 6 × 3 × 3 cm
Connector Type

,

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “SMA Male 50Ω to BNC Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel & Nickel-Plated Brass”

Your email address will not be published. Required fields are marked *