,

SMA Male 50Ω to N Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel & Nickel-Plated Brass

$274.00

+ Free Shipping
SKU: RAMP03S02 Categories: ,

The RAMP03S02 is a matching pad that joins an SMA Male 50Ω to an N Female 75Ω: a 50 ohm line on one side, a 75 ohm network on the other, combined in one body specified from DC to 3 GHz.

The conversion is done by a resistive network, not a transformer: the mismatch is absorbed as a defined loss, which keeps the measurement repeatable.

Use it when a 75 ohm device has to be measured on a 50 ohm analyser, or when a 50 ohm source feeds a 75 ohm distribution network. The pad makes the error a known constant instead of a cable-dependent unknown.

FAQ – Does direction matter? Order by the 50 ohm connector you have and the 75 ohm connector you need. The pad is electrically symmetrical, but the two interface families are not interchangeable.

FAQ – Why not just use a plain barrel? A barrel leaves the impedance step in place, so part of the power reflects and readings depend on the surrounding electrical length. The matching pad trades that reflection for a fixed, repeatable loss.

Connect SMA Male 50Ω on the instrument side and N Female 75Ω on the network side; each side is labelled by its connector and impedance in the part number.

Key numbers: 50 ohm to 75 ohm matching pad; DC to 3 GHz; VSWR 1.25:1 max; passivated stainless steel body.

FAQ – How much loss does the pad add? The theoretical minimum for a 50/75 ohm matching pad is about 5.7 dB; the exact figure for each part is stated in its specification.

RAMP03S02 datasheet preview – click to view full PDF

Weight 0.03 kg
Dimensions 6 × 3 × 3 cm
Connector Type

,

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “SMA Male 50Ω to N Female 75Ω Impedance Converter | Precision, DC-3GHz, Stainless Steel & Nickel-Plated Brass”

Your email address will not be published. Required fields are marked *