,

SMA Male High-Power Coaxial Termination | Professional, DC-8.5GHz, 100 W, Round, Ternary Alloy Plated Brass Connector

$514.00

+ Free Shipping
SKU: RT8100SM Categories: ,

A spare port with nothing on it is an open circuit. RT8100SM terminates it into 50 Ω and takes 100 W of dissipation up to 8.5 GHz.

Specifications

  • Frequency: DC to 8.5 GHz
  • Impedance: 50 Ω
  • VSWR: 1.2:1 max
  • Dissipation: 100 W
  • Interface: SMA
  • Body and contact: Ternary Alloy Plated Brass
  • Grade: Professional

Where it fits in a setup

It ends a transmit line that has nowhere to go — a test coupler port, a spare amplifier output, a switch position that is not in use. The body must be able to shed the power continuously, so it is normally mounted to metal rather than left hanging on a cable.

Mating and compatibility

SMA is a 1/4-20 threaded interface: it mates with 3.5mm, but only to the SMA limit of about 18 GHz, and the weaker side always sets the performance. Two parts worth comparing are SMA Female Coaxial Termination (RT2710SF) and SMA Male Medium-Power Coaxial Termination (RT450SM) — same interface family, different grade or body style, so the choice usually comes down to the frequency headroom you need rather than to the price.

A common question

Can this termination be used continuously at full power?
Yes, at the rated power and ambient temperature in still air. Above that ambient the rating derates, and mounting the body to a metal surface buys back some margin.

RT8100SM datasheet preview – click to view full PDF

Mounting hardware and the flatness of the mating flange dominate repeatability at this power level; a professional part fitted to a warped panel will measure worse than an economy part fitted properly.

Connector Type

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “SMA Male High-Power Coaxial Termination | Professional, DC-8.5GHz, 100 W, Round, Ternary Alloy Plated Brass Connector”

Your email address will not be published. Required fields are marked *