RT1250SM is the medium-power SMA load in this range: 50 W rating, male interface, DC to 12.4 GHz.
The rating sits between bench pads and rack loads: the body carries enough metal to run at rated power for hours, with no fan and no derating curve below the limit.
The DC to 12.4 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 50 W dissipation; VSWR 1.35:1 max; 50 ohm impedance; DC to 12.4 GHz; ternary alloy plated brass body.
Typical use is leaving an unused port terminated, dummy-loading a transmitter during alignment, or providing a stable 50 ohm sink at the far end of a line under test.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Is ‘dummy load’ something different again? It is a third name for the same component: a connectorised resistor that soaks up RF power instead of reflecting it.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.







Reviews
There are no reviews yet.