,

SMA Medium-Power Coaxial Fixed Attenuator | Professional, DC-8.5GHz, 20 W, 1-40 dB, Unidirectional, Male Input, Female Output, Round, Stainless Steel Connector

$206.00

+ Free Shipping
SKU: R8S20-XX Categories: ,

A fixed SMA Medium-Power attenuator, R8S20-XX holds 1-40 dB across DC to 8.5 GHz at 20 W of input power.

A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.

The DC to 8.5 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.

Key numbers: attenuation 1-40 dB; 20 W power; VSWR 1.2:1 max; 50 ohm impedance; passivated stainless steel body.

Field engineers carry them for the opposite reason: when the reading is over range, the pad brings the signal back inside the instrument’s window.

FAQ – What happens above 8.5 GHz? The attenuation accuracy and VSWR are specified to 8.5 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.

FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.

The pad is unidirectional: power flows from the input connector to the output, and the higher rating sits on the input side, which is how high-power pads protect the following stage.

The 20 W rating is a continuous rating with the body in free air; derate it if the pad is boxed up against other hot components.

FAQ – Which end takes the power? For unidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.

R8S20-XX datasheet preview – click to view full PDF

Weight0.05 kg
Dimensions8 × 5 × 4 cm
Connector Type

Max Frequency

Reviews

There are no reviews yet.

Be the first to review “SMA Medium-Power Coaxial Fixed Attenuator | Professional, DC-8.5GHz, 20 W, 1-40 dB, Unidirectional, Male Input, Female Output, Round, Stainless Steel Connector”

Your email address will not be published. Required fields are marked *