,

SMA Medium-Power Coaxial Fixed Attenuator | Professional, DC-8.5GHz, 30 W, 1-40 dB, Unidirectional, Female Input, Female Output, Round, Stainless Steel Connector

$257.00

+ Free Shipping
SKU: R8S30FFU-XX Categories: ,

R8S30FFU-XX is the SMA Medium-Power fixed attenuator in this range: 1-40 dB of attenuation, 30 W dissipation, specified DC to 8.5 GHz.

A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.

Connect it the way the title states: input takes the source, output feeds the load. The rating difference between the two ends is deliberate.

The 30 W rating is a continuous rating with the body in free air; derate it if the pad is boxed up against other hot components.

The DC to 8.5 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.

Key numbers: attenuation 1-40 dB; 30 W power; VSWR 1.2:1 max; 50 ohm impedance; passivated stainless steel body.

Typical use is protecting a receiver or spectrum-analyser front end from an over-level signal, or setting a known level into a device under test.

FAQ – What happens above 8.5 GHz? The attenuation accuracy and VSWR are specified to 8.5 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.

FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.

FAQ – Will it change my VSWR? A fixed resistive pad actually improves the match seen by both sides, because the attenuating network absorbs reflections. The VSWR figure below is the number to design against.

R8S30FFU-XX datasheet preview – click to view full PDF

Weight0.05 kg
Dimensions8 × 5 × 4 cm
Connector Type

Max Frequency

Reviews

There are no reviews yet.

Be the first to review “SMA Medium-Power Coaxial Fixed Attenuator | Professional, DC-8.5GHz, 30 W, 1-40 dB, Unidirectional, Female Input, Female Output, Round, Stainless Steel Connector”

Your email address will not be published. Required fields are marked *