A fixed SMA Medium-Power attenuator, R8S50UA-XX holds 1-50 dB across DC to 8.5 GHz at 50 W of input power.
A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.
The pad is unidirectional: power flows from the input connector to the output, and the higher rating sits on the input side, which is how high-power pads protect the following stage.
At 50 W of dissipation the body is sized to take continuous input at that level; the resistive element and its heat path are matched to it, which is why the rating is a hard number rather than a guideline.
The DC to 8.5 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.
Key numbers: attenuation 1-50 dB; 50 W power; VSWR 1.25:1 max; 50 ohm impedance; tri-metal plated brass body.
On a production line it lives in the fixture, set once and forgotten, so every unit under test sees the same level.
FAQ – What happens above 8.5 GHz? The attenuation accuracy and VSWR are specified to 8.5 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.
FAQ – Which end takes the power? For unidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.
FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.







Reviews
There are no reviews yet.