R6T20-XX pads a TNC Medium-Power line down by 1-40 dB: a fixed 50 ohm attenuator, DC to 6 GHz, rated 20 W.
A fixed pad trades flexibility for certainty: the value is what it says, every time, across the band.
At 20 W of dissipation the body is sized to take continuous input at that level; the resistive element and its heat path are matched to it, which is why the rating is a hard number rather than a guideline.
The DC to 6 GHz range is the accuracy band: inside it the attenuation stays within the printed tolerance and the VSWR within its figure.
Key numbers: attenuation 1-40 dB; 20 W power; VSWR 1.25:1 max; 50 ohm impedance; tri-metal plated brass body.
Field engineers carry them for the opposite reason: when the reading is over range, the pad brings the signal back inside the instrument’s window.
FAQ – Can I cascade two pads? Yes, and the dB values add. Check that the first pad’s power rating covers the incoming level and that the second sees a lower power, which it will.
FAQ – What happens above 6 GHz? The attenuation accuracy and VSWR are specified to 6 GHz; beyond that the pad will still attenuate but no longer to the printed accuracy.
The pad is unidirectional: power flows from the input connector to the output, and the higher rating sits on the input side, which is how high-power pads protect the following stage.
FAQ – Which end takes the power? For unidirectional. The input connector is stated in the title, and the datasheet marks it on the outline drawing.




![[Premium Pick] SMA Coaxial Fixed Attenuator | Professional, DC-18GHz, 2 W, 1-30 dB, Bidirectional, Male-Female, Round, Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/R18S2X-XX.png)


Reviews
There are no reviews yet.