The RT4025M is a 2.92mm coaxial termination: male interface, 25 W of dissipation, specified from DC to 40 GHz.
A medium-power element needs more heat path than a bench pad, so the body is extended or finned and rated for continuous free-air operation.
Typical use is leaving an unused port terminated, dummy-loading a transmitter during alignment, or providing a stable 50 ohm sink at the far end of a line under test.
FAQ – Is ‘dummy load’ something different again? It is a third name for the same component: a connectorised resistor that soaks up RF power instead of reflecting it.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.
The cylindrical body is the classic bench shape: it screws straight onto the port and needs no mounting hardware.
From DC to 40 GHz the termination holds its VSWR figure; above the limit the match degrades, which matters if you rely on the load to absorb reflected power.
Key numbers: 25 W dissipation; VSWR 1.3:1 max; 50 ohm impedance; DC to 40 GHz; passivated stainless steel body.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.





![[Premium Pick] N Male Coaxial Termination | Economy, DC-18GHz, 2 W, Round, Nickel-Plated Brass Connector](https://rfspect.com/wp-content/uploads/2026/09/RT182NM-NBA.png)

Reviews
There are no reviews yet.