, ,

N Male to TNC Female Right Angle 90° Adapter | Ultra, DC-18GHz, Stainless Steel

$257.00

+ Free Shipping
SKU: RA18N25WH Categories: , ,

RA18N25WH is a passive right-angle adapter for the N male-to-TNC female transition, with the 50 ohm match held from DC to 18 GHz. The headline figures are a VSWR of 1.25:1 maximum and an insertion loss of 0.40 dB, all specified across the full DC to 18 GHz band rather than at spot frequencies. One end is male and the other female, so the direction is fixed: the pin goes into the port that expects it, and the part cannot be reversed. One-piece construction is the point: every extra mating plane is another reflection, and this part replaces a stack of them with a single joint. The 90° body turns the cable away from the panel, which is how a tight rack keeps its runs short and its bend radii legal. It is built in the Ultra tier, the tightest tolerance class of this interface family, intended for daily precision work.

Specifications

  • Interface A: N male
  • Interface B: TNC female
  • Frequency: DC to 18 GHz
  • Impedance: 50 ohm
  • VSWR: 1.25:1 maximum
  • Insertion loss: 0.40 dB maximum
  • Body: stainless steel
  • Body style: Right angle
  • Weight: 0.03 kg
  • Grade: Ultra

Where it is used

Field kits carry it because one adapter covers the mismatch between whatever the site has and whatever the instrument expects. It also earns its place in system integration, where two sub-assemblies with different connectors have to be joined without a custom cable.

It is a passive part with no tuning, so it can be swapped in mid-project without re-characterising the rest of the chain.

Up to 18 GHz the connector is electrically small, which is why the same body works across the whole band without a tuning feature.

Compatibility and mating

Standard N cables and ports mate it directly. Check that the centre pin is straight before mating; a bent pin on an N connector is common after a cable has been dragged across a floor.

Each end keeps its own interface standard, which is why the part number lists both series rather than a single connector type.

Store it capped. A mating plane that has collected grit will score the dielectric the first time it is torqued down.

Ordering

Order by the part number as listed: the code encodes the interface pair, the gender at each end and the body style, so a different suffix is a different part rather than a variant of this one.

Frequently asked questions

How many mating cycles will it take?
Precision interfaces are usually rated in the hundreds to a thousand cycles, and the exact figure is in the datasheet. Wear shows first as a rise in return loss.

Does it work at DC?
Yes, it is a passive coaxial through-connection, so it passes DC as well as RF unless the datasheet says otherwise.

Why does the price differ from a standard adapter?
Precision tiers hold tighter tolerances and use better materials and plating, which costs more to machine and to test. The tier is part of the part number, not an option.

Can I use it the other way round?
Mechanically the adapter is symmetric only if both ends are the same sex. With a male/female pair the direction is fixed by the genders, so match the male end to the female port.

Does an adapter add loss?
Yes, a small amount. The datasheet gives the maximum insertion loss for this part; at these frequencies it is usually a few tenths of a dB, but it belongs in the budget.

RA18N25WH datasheet preview – click to view full PDF

Weight0.03 kg
Dimensions6 × 3 × 3 cm
Connector Type

,

Max Frequency

Series

Reviews

There are no reviews yet.

Be the first to review “N Male to TNC Female Right Angle 90° Adapter | Ultra, DC-18GHz, Stainless Steel”

Your email address will not be published. Required fields are marked *