Where a SMA port has to be left matched, RT6100SM does the job: a male 50 ohm termination rated 100 W, DC to 6 GHz.
This is a high-power body: the element is sized for continuous dissipation at the rating, and the construction around it exists to keep the element cool rather than to look compact.
The DC to 6 GHz specification is the band over which the element is guaranteed matched; treat anything above it as out of tolerance.
Key numbers: 100 W dissipation; VSWR 1.2:1 max; 50 ohm impedance; DC to 6 GHz; ternary alloy plated brass body.
Typical use is leaving an unused port terminated, dummy-loading a transmitter during alignment, or providing a stable 50 ohm sink at the far end of a line under test.
FAQ – What VSWR should I expect? The figure in the specs below is the guaranteed maximum across the band; a healthy termination typically measures better on the bench.
FAQ – Is ‘dummy load’ something different again? It is a third name for the same component: a connectorised resistor that soaks up RF power instead of reflecting it.
The round in-line body suits panel jacks and bench use, where it hangs on the port and convects freely.
FAQ – Does mounting orientation matter? For the finned bodies, yes: they are rated to convect with the fins vertical. Enclosing one or mounting it against a panel cuts the rating.





![[Premium Pick] 2.92mm(K,SK) Male Millimeter-Wave Coaxial Termination | Professional, DC-40GHz, 2 W, Round, Passivated Stainless Steel Connector](https://rfspect.com/wp-content/uploads/2026/09/RT402MX.png)

Reviews
There are no reviews yet.